#
# /etc/raidtab
#
# After Creating the raid config ( /etc/raidtab ) file:
# -----------------------------------------------------
#
#
# To Initialize Raid
# ------------------
#	mkraid /dev/md0
#	mkraid -c raidtab /dev/md0
#
#
# To Check if its recognized
# --------------------------
#	cat /proc/mdstat
#
# To Format /dev/md0
# ------------------
#       mke2fs -m 1 /dev/md0
#		-or-
#	mke2fs -b 4096 -m 1 -R stride=16 /dev/md0
#
# To Mount it and use the raid device
# ------------------------------------
#	mkdir Raid ; mount /dev/md0 Raid
#
#
# To Stop and Start it
# --------------------
#       raidstop  /dev/md0 --- check with "cat /proc/mdstat"
#       raidstart /dev/md0 --- check with "cat /proc/mdstat"
#
#
#
# Don't forget to properly startup and shutdown the system too
#
#
# 12-Feb-99 amo Date-of-Birth
# 15-Oct-01 amo Added persistent-superblock
#
#
#
# Raid0 == Stipped
# Raid1 == Mirror
#
#
# First Raid device
# -----------------
#
raiddev	/dev/md0
#
# General parameters
#
raid-level		1
# it's not obvious but raid-level *must* be  right after raiddev
#
#
nr-raid-disks		2
#
chunk-size		256
#
#
persistent-superblock	1
#
# RAID disks
#
device		/dev/hdc1
raid-disk	0
#
device		/dev/hdd1
raid-disk	1
#
#
#
# next raid device
# ----------------
#
# raiddev	/dev/md1
# ....
#
#
# end of file